Ignition on/OFF is not recognized on OBDII Emulator

[shubham]

Hello Team,

I am trying to Ignition On/Off on GUi but it is nor recognized with my device.

Anybody can help me to resolve this issue.

[stanley]

What OBD device are you using? The emulator does not simulate the voltage change between ignition on and off. If your device uses that as a reference for ignition, you will need to manually adjust the input DC voltage to reflect the change.

[shubham]

Thank you, I am using this on with my PC. My OBD II Device got powered on and working.

Here i want to change the OBD parameters but none of the parameters are being reflected on OBD II devcie when i change it from freematics obd II software.

Can i get some support here ?

Steps:
1. OBD II software installed with software and my OBD II connnected.
2. Able to connect from software and seeing changes whenever i change protocol from CAN 250k 11 etc.
3. I connected my OBD II Device and trying to change parameters in the software.
None of the parameters are being reflected.
Here i am looking fwd for your support.

your inputs are verymuch imp for me to bringup the emulator further.


stanley wrote:
> What OBD device are you using? The emulator does not simulate the voltage
> change between ignition on and off. If your device uses that as a reference
> for ignition, you will need to manually adjust the input DC voltage to
> reflect the change.

[rjilvit]

FreeMatics OBD II emulator i am using.
Here Please let me know where is this option to manually adjust the input voltage.

Apart from this after the device is powered on I am unable to get OBD protocols changed.
Here I changed the Protocol type : This is not reflected.
In the protocol that is set i am able to see the currently set protocol but none of the PID gets reflected.

What is the use of GUI provided by Freematics OBD II Emulator. In the GUI if i change any of the PID it needs to be reflected on my OBD.



Please do let me know the OBD u shipped is damaged or what is the problem with this.

[stanley]

There is no way to change voltage on OBD pins. You need to adjust the input voltage of the emulator to archive this. Some OBD device might require a voltage change to start working.
The GUI is used to adjust the OBD PIDs and something else.

[alecg]

You cant change voltage on OBD pins. adjust the input voltage of the emulator to archive this instead