Set MIL to Off ?

[stanley]

What specific DTC is still left on?

[itsmagic]

The DTC causing the MIL is P0105 and it cnanot be cleared from the UI or the serial port. The stored
freeze frame DTC's all say: "Fault Definition Not Available or Manufacturer Specific" on my OBD scanner.
They are also not clearable.

[stanley]

Please update the firmware of your emulator. Firmware is included in the GUI software package.
http://freematics.com/pages/software/fr ... lator-gui/

[itsmagic]

I installed the brand new firmware and GUI you mentioned above.
Unfortunately the new Version 1.0-20150509 firmware and GUI did NOT address the described problems.
After installing, MIL is still on, The freeze frame still has: DTCFRZF = P0105 and DTC_CNT is
still 6 with Six stored freezeframe DTC's. I tried clearing the DTC's and MIL... no joy.
*Please* fix this.

[stanley]

Did you upgrade the firmware? Latest firmware revision is 20150509.

[itsmagic]

Yes. As stated in my post above: Version 1.0-20150509 firmware which is the latest.
The new firmware does not fix the MIL = ON or the freezeframe DTC's. If you try your's,
you will see it right away.

[stanley]

I was informed by several emulator users that this issue is fixed by the firmware upgrade.

[cuyusa]

stanley can you explain how are we doing this?? with out individual help (team viewer) please or configurate the software when this issue affecting your wonderful product....

[itsmagic]

I have updated the firmware to the new level and repeated it a couple of times, all attempts have had the same results:

Hex file: Firmware_20150509.hex Installs, but MIL is still on with 6 Freezeframe DTC's

Hex file: Firmware_J1850_20150509.hex Installs, but the GUI will then not connect to emulator.

If others try this upgrade, please post and let us know your results.

[stanley]

Please upgrade the latest firmware released in July 2015 and it will competely fix this issue.