Freematics One + not connecting via NET_SIM7600
Posted: Mon Jul 13, 2020 9:30 am
I have purchased a new Telstra data SIM which has since been activated, however my Freematics One + won't establish a connection no matter what settings I try...
The sim is on a data only plan, and I have set the following:
The other settings are set to connect to hub.freematics.com via UDP and nothing else has changed in the code.
The hub never registers any connection data.
This is what appears in the console after an upload:
Any help would be appreciated.
The sim is on a data only plan, and I have set the following:
Code: Select all
#define NET_DEVICE NET_SIM7600
#define CELL_APN "telstra.iph"
#define SIM_CARD_PIN "XXXX"
The hub never registers any connection data.
This is what appears in the console after an upload:
Code: Select all
CPU:240MHz FLASH:4MB
IRAM:359KB
DEVICE ID:XXXXXX
TYPE:16
MEMS:ICM-20948
ACC BIAS:-0.00/-0.03/0.85
GNSS:OK
OBD:NO
STANDBY
ACC BIAS:-0.00/-0.04/1.03
CELL:SIM7600E
IMEI:XXXXXXXXXXXX
NO SERVICE,Online
SIM7600E OFF
GNSS OFF