I've connected the emulator to my custom board. I want to read a mod 01 PID 0xC0 (rpm).
I send 7DF 0201C00000000000 over CAN @250kbaud 11-bit. The frame gets ACKed (I see it with a logic analyzer) by the emulator, but no response is sent back (even within ~10 seconds).
This is my terminal from emulator side:
OBD-II EMULATOR V1.2
atbus CAN_11B_250K
OK
ate1
OK
ATSET 010C=0x31,0x64
OK
atinf1
OK
REQ: 00 00 07 DF 02 01 C0 00 00 00 00 00
Thanks for help