Page 1 of 1
Problem when setting more than one DTC code
Posted: Thu Dec 04, 2014 7:47 pm
by Alex4WAG
Hello,
I received your OBD-Emulator MK2 this week. This is a very nice tool
Unfortunately I experienced a problem when setting more than one DTC-code.
Although the GUI confirms that more than one code is set simultanously, I do only get one DTC-code when checking with an OBD-tool.
This is a function that I urgently need for my development work.
Can you help?
Regards,
Alex.
Re: Problem when setting more than one DTC code
Posted: Sat Dec 06, 2014 1:35 pm
by stanley
Just set one more time to add a DTC code. Up to 6 DTC codes can be set.
Re: Problem when setting more than one DTC code
Posted: Mon Dec 08, 2014 9:49 pm
by Alex4WAG
Hi Stanley,
that is exactly what I am doing.
For example after setting 3 different DTCs the GUI confirms with "Totally 3 DTCs has been set".
But when checking with a fault code reader only the last DTC ist set.
When checking with a CAN-tool my request is: ($7df) $01 $03
The reply then is: ($7e8) $04 $43 $01 $03 $00
Fault codes 0100, 0200 and 0300 should be set.
Can you help?
Re: Problem when setting more than one DTC code
Posted: Fri Dec 12, 2014 11:28 pm
by stanley
Can you try upgrading with latest firmware which has just been released?
Re: Problem when setting more than one DTC code
Posted: Tue Dec 23, 2014 10:19 pm
by Alex4WAG
Yes, I did but the problem persists with the firmware dated Dec. 9th.
Re: Problem when setting more than one DTC code
Posted: Mon Jan 05, 2015 2:23 pm
by cavalier
I am facing with this problem too. I have updated firmware but the problem isn't fixed yet.
Re: Problem when setting more than one DTC code
Posted: Tue Jan 06, 2015 2:17 am
by chad.schnitz
I am having the same issue <p>
- Only the last code shows
- Freematics1.png (127.14 KiB) Viewed 16981 times
- 4 DTCs entered
- freematics3.png (174.08 KiB) Viewed 16981 times
Re: Problem when setting more than one DTC code
Posted: Tue Jan 20, 2015 3:18 pm
by bernardofca
Same problem here.
At least please acknowledge the problem and suggest a target resolution date.