Good afternoon, I recently acquired the freematics one +, I have been reading about the process of installation of the "datalogger sketch", and I have already installed the freematics libraries, but when i tried to upload with the arduino IDE, I get the following error:
avrdude: error: could not find USB device with vid = 0x16c0 pid = 0x5dc vendor = 'www.fischl.de' product = 'USBasp'
avrdude: error: could not find USB device with vid = 0x16c0 pid = 0x5dc vendor = 'www.fischl.de' product = 'USBasp'
please can you help me because I do not like to upload the sketch.
Thank you very much in advance