SIM7070G not working with Hologram

[guterz]

Hello,
I’m having trouble using a Hologram SIM with the Freematics ONE+ Model B and Freematics ONE+ Model H.
The SIM cards works fine when tested in a phone, but it doesn’t seem to function with the Freematics devices.
Has anyone experienced this issue or have any suggestions on how to fix it?
Thank you!

[CELL] Activating...
CELL:SIM7070G
IMEI:8654XXXXXXXXXX
[CELL] Searching...
APN:hologram
[BUF] 3 samples | 30 bytes | 1/32
[BUF] 9 samples | 90 bytes | 3/32
[BUF] 15 samples | 150 bytes | 5/32
[BUF] 21 samples | 210 bytes | 7/32
[BUF] 27 samples | 270 bytes | 9/32
[BUF] 33 samples | 330 bytes | 11/32

+CGREG: 0,2

OK


+CGREG: 0,2

OK

[handiworkfruitful]

Network Bands: Ensure your region’s bands match the SIM7070G and Hologram SIM.
APN Setup: Confirm APN is set to hologram:
AT+CGDCONT=1,"IP","hologram"
Automatic Registration: Force auto network selection with:
AT+COPS=0
Signal Check: Run AT+CSQ to check signal strength. Low signal might be the issue.
Firmware Update: Ensure your SIM7070G firmware is up to date for best compatibility.

[rdruiz]

Hi !

I have a similar problem,

Can you help me, where can I send AT commands for testing?

OK
[CELL] Activating...
[BUF] 96 samples | 960 bytes | 32/32
Stationary for 180 secs
[GPS] OFF
STANDBY
CELL:SIM7070G
ACC BIAS:-0.10/-0.14/-0.96
IMEI:867280066666868
[CELL] Searching...
APN:internet.movistar.com.co

+CGREG: 0,3

OK


+CGREG: 0,3

OK