I will... Already started prototyping the GUI of my version.
But before that I have few questions/issues that I need help on:
1. Please see movie link below:
https://www.youtube.com/watch?v=-PLSLSBEDYYYou can see it seems to be running ok for a few seconds, but then suddenly the OBD connector stops flashing it's blue leds and the rpm (and other OBD data freezes on the screen at 6 second mark) At 14 seconds it comes back to life... This keeps happening with random intervals. I adjusted the wires looking for bad connections but it does not seem to be related to that. Any ideas?
1b. If you look closely (view the youtube in HD!) you'll see the ODB Time is not running sequentially... it jumps around note this especially when it comes back to life at the 14 second mark.
2. The data that is logged to the SD seems unreadable by the online tool (says that no data is in the file) and can not be converted by the windows dataToKML (hangs the script). Attached is a link to a short example file. Any ideas? Config etc are all as per latest bundle downloaded yesterday.
https://dl.dropboxusercontent.com/u/11683952/DAT00002.CSV3. Updating firmware in OBD-2 adapter? Can this be done? Maybe it is needed to solve my above issue...
![Wink ;)](./images/smilies/icon_e_wink.gif)
I saw on the programming guide page that it can be done, but the unit I have does not expose the programming pins. It seems there are a few versions out there? Is there a comprehensive step by step to updating the firmware? I have another Arduino unit I could use as a programmer, or is there already some process using the Kit #3 as-is?
Thanks in advance for everyone's help on this. I'm excited to get this going for my bikes (and have a few other people here in Tokyo interested if I can!)