![Image](http://i.imgur.com/sfHy0Ld.jpg)
2. Then I connected it the appropriate way and it connects but can't read RPM and therefore displays this.
![Image](http://i.imgur.com/5ykvQPU.jpg)
3. I thought maybe I'm wrong, let's connect it a different way. Still nothing.
![Image](http://i.imgur.com/G5N8jFD.jpg)
4. Then I tried connecting it with an entirely different LCD and Bluno and connecting the wires the appropriate way. Same issue as step 2. Mind the LCD washing out.
![Image](http://i.imgur.com/vUB8hmx.jpg)
5. Then I switched how I connected the wires. Nothing.
![Image](http://i.imgur.com/cz4aP3m.jpg)
6. Maybe it's the adapter? So I tried the new adapter I got with KIT-2.
![Image](http://i.imgur.com/SSF9vfN.jpg)
7. Let's connect the wires.
![Image](http://i.imgur.com/IrlIRC2.jpg)
8. Maybe switch the wires?
![Image](http://i.imgur.com/Q90KtTo.jpg)
9. Maybe its the chip and LCD. Switch back to Uno and LCD that used to work.
![Image](http://i.imgur.com/y5C6yAQ.jpg)
10. Maybe switch the wires?
![Image](http://i.imgur.com/CRjSJT7.jpg)
Nothing worked no matter what I did. The samples of the code in here are from the 4884 LCD Sample. I also tried the normal OBD-2 sample UART that makes the light flash when the RPM is 3000. Still nothing.