Hello ,
I am setting up the Freematics OBD-II emulator using 500kbps/29 bits. I have STN2100-based OBD device connected to the emulator. It always returns "NO DATA" and STN2100 can not read the emulator values.
and this is output I got:
I can not fix this issue? Any help what is the problem?
AT CMD: AT Z
ELM327 v1.3a
AT CMD: AT E0
AT E0
OK
AT CMD: AT CAF0
OK
AT CMD: AT V0
OK
AT CMD: AT BI
OK
AT CMD: AT SP B
OK
AT CMD: AT PC
OK
AT CMD: AT H1
OK
AT CMD: AT CP 18
OK
AT CMD: AT PB 60 01
OK
AT CMD: AT SH DB33F1
OK
AT CMD: AT DP
USER1 (CAN 29/500)
AT CMD: 02011C0000000000
NO DATA
AT CMD: 0201000000000000
NO DATA
AT CMD: 0100
NO DATA
AT CMD: 0201000000000000
NO DATA
Detected Valid CAN Bus. No Service 01 support
29-bit CAN returns no DATA on Freematics OBD-II emulator.
-
- Posts: 1
- Joined: Mon Jul 03, 2023 4:51 pm