Page 1 of 1
How to configure APN user and password
Posted: Tue Mar 28, 2023 9:46 am
by dry
Hi everyone.
I just bought a Freematics One+ and I'm configuring to use telelogger.
My APN provider must be configured with: apn address, apn user and password. So, please, how can I set the 'user' and 'password' on telelogger configuration?
Thank you in advance.
Re: How to configure APN user and password
Posted: Thu Apr 13, 2023 5:29 am
by Fictifs
Hello,
I'm not sure about this but i found this piece of code in "Freematics-master\libraries\FreematicsPlus/FreematicsNetwork.cpp"
Code: Select all
...\Freematics-master\libraries\FreematicsPlus\FreematicsNetwork.cpp
Ligne 333: //sendCommand("AT+CSOCKAUTH=1,1,\"APN_PASSWORD\",\"APN_USERNAME\"\r");
Ligne 977: //sendCommand("AT+CSOCKAUTH=1,1,\"APN_PASSWORD\",\"APN_USERNAME\"\r");
Ligne 1262: //sendCommand("AT+CSOCKAUTH=1,1,\"APN_PASSWORD\",\"APN_USERNAME\"\r");
Depending your case maybe you may put it here. Don't forget to rebuild libs after modifications
Good luck and keep us updated about it,
Re: How to configure APN user and password
Posted: Thu Sep 12, 2024 5:55 pm
by benm4nn
Hi there, did this approach work for you? I tried modifying the code, but the serial read out does not confirm whether the APN details were correctly passed and the device still can't connect to the network...
Re: How to configure APN user and password
Posted: Thu Oct 10, 2024 10:20 pm
by willams
To configure an APN (Access Point Name) with a user and password, go to your device's network settings and select "Mobile Networks" or "Cellular Networks." Choose "Access Point Names" and create a new APN. Enter the required APN details
directv tv packages provided by your carrier, including the username and password fields. Save the settings, and your device will connect to the network using the configured credentials.