Freematics Forum

Hi all,

Just bought a Freematics Traccar Edition and been trying the past 2 days make it work.
I followed the instructions and installed the telelogger.ino sketch.
First I tried to connect to my own server since the traccar IOS client was working perfectly, but never managed to connect.
Then I decided to give it a try and connect to the demo servers, also unsuccessfully.

My logs are giving me this:

E (178) psram: PSRAM ID read error: 0xffffffff
E (178) spiram: SPI RAM enabled but initialization failed. Bailing out.
CPU:160MHz FLASH:4MB
IRAM:347KB
DEVICE ID:xxxxxx
TYPE:16
MEMS:ICM-20948
ACC BIAS:-0.02/-0.03/0.95
GNSS:OK
OBD:NO
NO SD CARD
[BUF] 3 samples | 26 bytes | 3%
[BUF] 12 samples | 104 bytes | 12%
[BUF] 19 samples | 170 bytes | 21%
[BUF] 28 samples | 248 bytes | 31%
CELL:SIM7600E-H
IMEI:860147050683430
[BUF] 36 samples | 320 bytes | 40%
Operator:Ooredoo Ooredoo
[BUF] 45 samples | 398 bytes | 50%
[BUF] 53 samples | 470 bytes | 59%
IP:10.145.95.147
RSSI:-73dBm
LOGIN(demo4.traccar.org:5170)...
[BUF] 61 samples | 542 bytes | 68%
[BUF] 69 samples | 614 bytes | 78%
[BUF] 75 samples | 666 bytes | 84%
[BUF] 81 samples | 718 bytes | 90%
Server timeout
LOGIN(demo4.traccar.org:5170)...
[BUF] 86 samples | 764 bytes | 96%
[BUF] 89 samples | 790 bytes | 100%
[BUF] 88 samples | 784 bytes | 100%
Server timeout
LOGIN(demo4.traccar.org:5170)...
[BUF] 88 samples | 784 bytes | 100%
[BUF] 89 samples | 790 bytes | 100%
[BUF] 89 samples | 790 bytes | 100%
Server timeout
LOGIN(demo4.traccar.org:5170)...
[BUF] 89 samples | 790 bytes | 100%
What am I doing wrong?
Its so frustrating.

Thanks in advance

solved. was having some issues with ports