Page 1 of 1
Unable to connect to CELL
Posted: Fri Sep 03, 2021 10:43 pm
by dfritz
Hi,
till yesterday everything was fine. I just want to change the sim card to another sim but now
I only get
CELL:NO and OFF
Any hint ? I already earased the flash and installed it new. But I do not work with old or new sim.
thx
Re: Unable to connect to CELL
Posted: Mon Sep 06, 2021 5:12 pm
by stanley
Which product do you have?
Re: Unable to connect to CELL
Posted: Mon Sep 06, 2021 5:28 pm
by dfritz
FreematicsONE+
I tried now the sim7600test sketch. Output is just
Init cellular module...NO
Init cellular module...NO
Init cellular module...NO
Init cellular module...NO
Init cellular module...NO
Init cellular module...
Re: Unable to connect to CELL
Posted: Mon Sep 06, 2021 5:33 pm
by stanley
Which model of ONE+. Do you have cellular module?
Re: Unable to connect to CELL
Posted: Mon Sep 06, 2021 5:40 pm
by dfritz
Device ID:
A0HN863S
Device Type: Freematics ONE+ Model B
FLASH: 16MB
PSRAM: 8191KB
SD Card: 7572 MB total, 0 MB used
Motion Sensor: ICM-20948
RTC:
GNSS: 51.585594 6.257984 5km/h SATS:8 Course:277 2021-09-06T07:38:07.400Z
OBD:
Wi-Fi:
Cellular Module
Cellular SIM Card
Buffer: 340 samples | 2296 bytes | 100%
Server:
File: 15KB
Here are the data of Freematic Build Page. Cellular module is onboard. SIM card also. I tried to change the SIM but also nothing happend.
Re: Unable to connect to CELL
Posted: Mon Sep 06, 2021 5:42 pm
by dfritz
Model with 7600E-H chipset for european networks
Re: Unable to connect to CELL
Posted: Wed Nov 03, 2021 7:37 pm
by ClaraM05
dfritz wrote: ↑Mon Sep 06, 2021 5:40 pm
Device ID:
A0HN863S
Device Type: Freematics ONE+ Model B
FLASH: 16MB
PSRAM: 8191KB
SD Card: 7572 MB total, 0 MB used
Motion Sensor: ICM-20948
RTC:
GNSS: 51.585594 6.257984 5km/h SATS:8 Course:277 2021-09-06T07:38:07.400Z
OBD:
Wi-Fi:
Cellular Module
Cellular SIM Card
Buffer: 340 samples | 2296 bytes | 100%
Server:
File: 15KB
Here are the data of Freematic Build Page
meilleure assurance chat . Cellular module is onboard. SIM card also. I tried to change the SIM but also nothing happend.
Not bad at all ! In addition there are all the technologies that we will need.
Re: Unable to connect to CELL
Posted: Thu Nov 04, 2021 12:25 pm
by stanley
It seems you are using modified code. Can you use the original one and make sure config.h is correctly changed.