Page 1 of 1
HOW USE THE USB PORT Freematics OBD-II UART Adapter V2
Posted: Fri Mar 17, 2017 11:44 pm
by machasoftware
Hi Stanley Huang and Kevin Huang, I have a new OBD II adapter for Arduino and I wonder:
1. How to use the usb port?Please illustrate.
2. What is the use of connecting the USB port to my computer? Please illustrate.
3. Do you have software to use the USB port?Please illustrate.
4. What is additional functionality the USB port?Please illustrate.
Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2
Posted: Fri Apr 14, 2017 6:35 am
by steveb
I have the same question. Just received a Freematics ONE and am trying to get some data from it in its out of box state. I hooked up a laptop running TeraTerm to the USB port on the adapter,, and all it does is wakes up, checks a few things and shuts down. I was expecting to see some PIDs coming up on the screen, but nothing. What am I doing wrong? Thanks
Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2
Posted: Sun Oct 08, 2017 7:10 pm
by fredrikj
I'm also wondering this.
Installed the CH340 driver and under the assumption that it uses the ELM327 tried connecting to a Volvo V50 2005 with "Freediag 1.08" and "OBD Auto Doctor" without success. Serial over USB looks like it's working but neither software can connect to ELM.
Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2
Posted: Sun Oct 08, 2017 7:54 pm
by stanley
The baudrate is 115200bps instead of 38400bps for ELM327.
Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2
Posted: Sat Dec 23, 2017 5:19 am
by gospod
Does anybody successfully connect with Mac?