How to set MODE 09 PID 04 and 06
Posted: Wed Dec 14, 2016 4:01 am
Hello, I want to set MODE 09 PID 04 - Calibration ID and PID 06 Calibration Verification Numbers to be clear
I try
ATSET 0904=0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
result OK
ATSET 0906=0x00,0x00,0x00,0x00
result OK
but diagnostic allready show CID = JVB*36761500 and CVN=17191BC82
Is any chance to clear or set this values?
Emulator is v.1.1 and protocol CAN 11B 500K.
Regards,
Jabu
I try
ATSET 0904=0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
result OK
ATSET 0906=0x00,0x00,0x00,0x00
result OK
but diagnostic allready show CID = JVB*36761500 and CVN=17191BC82
Is any chance to clear or set this values?
Emulator is v.1.1 and protocol CAN 11B 500K.
Regards,
Jabu