Page 1 of 1

Is the GPS module on the PCB or separate in V3?

Posted: Fri Nov 20, 2015 5:52 pm
by Vince
http://freematics.com/store/index.php?r ... duct_id=52

Wanted to but this one with GPS u-blox G6010. Wondering if the GPS module is not on the board.

Stanley?

Re: Is the GPS module on the PCB or separate in V3?

Posted: Sun Nov 22, 2015 9:19 pm
by stanley
GPS is embedded in the enclosure but not soldered on the PCB.