I try to make a simple Software, with the Mega Kit Hardware.
-Arduino MEGA
-Freematics 3.5" LCD Touch Shield for Arduino MEGA
Unfortunately i am lost in the first Phase.
Write Text on the Display.
The uploaded MegaloggerHD Sketch, from freematics works.
When i upload my own Code, nothing appears on the Display.
[code]
#include <MultiLCD.h>
LCD_R61581 lcd; /* 3.5" CTE35IPS/R61581 based LCD */
//LCD_SSD1289 lcd;
void setup() { // S E T U P
lcd.begin();
}
void loop() { // L O O P
lcd.setColor(0xFFE0);
lcd.setFontSize(FONT_SIZE_SMALL);
lcd.setCursor(110, 14);
lcd.print("ENGINE");
}
[/code]
I try to figure out, what Pins the SSD1289 Display Unit need for Communication.
With the 16*2 Displays, that i know, it is needed to be declare the Pins, that are connected to the Display.
[code]
#include <LiquidCrystal.h>
LiquidCrystal lcd(12, 11, 5, 4, 3, 2);
[/code]
In the MegaloggerHD Code, and in the used Library's, i can't find this Information.
And the Link to the Datasheet in the Store, is broken.
https://freematics.com/store/index.php? ... duct_id=70
Please Help