changing the ECU response ID's in OBD

[JulieD]

How do I change the ECU response ID in CAN 11-bit protocol? My simulator is responding with 0x7e8. I would like to be able to change it to ID's from 0x7e8 to 0x7ef. Are these ID's configurable?

[seb]

Would also be interested in this, as it is the same in my EV.

[adamusa]

In the CAN (Controller Area Network) protocol, devices exchange information through CAN messages. Each CAN message includes an ID on 11 bits (in CAN 2.0A version). The ID of the message determines the priority and how the message should be handled in the CAN network. mapquest directions