Freematics Forum

Hi Stanley,

Finally, I got the trackers to work.

So one of the hologram sim cards you send isn't working.

Wondering the rate of data being sent to the server? is it every 10 seconds? if so I could I change this x value?

thanks for the reply. so for the Arduino IDE, which Arduino library do I need to download, to use the tracker for a traccar server. according to your blog post: https://blog.freematics.com/2017/setting-up-your-own-vehicle-tracking-system-with-arduino/ Link to the download to the library is dated to ...

I don't think so the problem is solved yet.
*downloaded the latest code from GitHub and reinstalled the builder too.

(I need to get this tracker by working tomorrow lastest.)

Hi Stanley.

Your new update is generating errors. Please see attached.

Also, the config settings are different on this new version, can't select sim apn, external gnss, ....

When can I start tracking my vehicles its been more than 1-2 weeks now.

Good morning,

Regarding the new version of Freematics Builder, should i also change the value for #define VERBOSE_XBEE 1 in FreematicsPlus.cpp (the library)

Regarding the GNSS, it was supplied by you, my Order 13289.

When i changed the line on the FreematicsPlus.cpp (the library, ticked the rebuild libs. after building. then selecting the COM3, there is a blank screen no outputs are given.

I'm back from the car.

Still the same problem.

One is working but receiving the wrong GNSS signal its showing Latitude = 0.000000°Longitude =0.000000°
The second one is not working at all

tests were done on my desk, let me try it on OBD.

Done a test on the 1. device CPU:160MHz FLASH:4MB IRAM:359KB DEVICE ID:E5910RGP TYPE:16 MEMS:ICM-20948 ACC BIAS:0.00/-0.25/-0.99 GNSS:NO CELL:SIM7600E-H IMEI:860147050686862 OBD:NO SD:29832 MB total, 0 MB used /DATA/1.CSV /DATA/2.CSV /DATA/3.CSV /DATA/4.CSV /DATA/5.CSV /DATA/6.CSV /DATA/7.CSV /DATA/...

If you see GNSS:NO there is no chance any coordinates will be obtained. GNSS receivers are not detected for some reason. Have you tried both receivers? As for the cellular network issue, did you test with the same SIM card that works in another unit? Done a test on the 2. device E (202) spiram: SPI...