Freematics Forum

I have received Freematics One + a month ago as a replacement for Freematics One that has never worked properly in my car. My car is Seat Altea and uses the KWP2000 5Kbps protocol. For example, I have not been able to read the entire VIN from the car. Neither from Freematics One nor FreematicsOne +....

I have exactly the same problem. But when I switch speed to 57000Baud, it works 3 out of 5 times to connect and upload firmware.

stanley wrote:
> Which sketch?

This sketch

Datalogger

https://github.com/stanleyhuangyc/Freem ... datalogger

Hi Stanley

The latest updates to Freematics One 4 can not compile. Errror shows mssing datalogger.h.

Cann´t upload the zip.
It´s from the 22062017 on GITHUB.

stanley wrote: > Could you let me know which revision of code is working? > > Polkpolk wrote: > > Hi Stanley > > > > Just so you know. > > The last 6-8 updates of the library have meant that the KWP ISO 14230-4 KWP > > 5 baud has not worked with Freematics One The attached zip is the version I manag...

Hi Stanley

Just so you know.
The last 6-8 updates of the library have meant that the KWP ISO 14230-4 KWP 5 baud has not worked with Freematics One

Hi, I'm having trouble to get GPS to work. Data logging to SD works fine and stable without GPS but when I try with GPS, logging stops after <1 min. and the LED stops flashing and lights instead constantly. The GPS is a M8030 and is set to 11500 and 10Hz Connection is K-line slow. Any suggestions?

I have the same problem. The UBX-M8030 only works with 38400 baud, but the data logger only works for approx. 2 min and go to sleep. The UBX-M8030 can be programmed to another baud rate - 115200, but are there some who can help with a sketch? U-blox Parameters Setting Protocols You can send commands...

stanley wrote: > Just fixed a bug in recent revisions of Arduino libraries for Freematics > ONE and Freematics OBD-II Adapters which caused connection failure on > slower K-line protocols when It should be allowed longer time to finish > checking for valid PIDs. The fix has already been committed to...